Menu My space
Global Automotive & Mobility Solutions

S-in motion® for front seats

S-in motion® study cuts seat weight by almost 20 percent

ArcelorMittal’s S-in motion® solutions have helped carmakers achieve significant weight reductions on their vehicles with the most advanced high strength steels available today. Front seats are the latest vehicle component to be examined as part of S-in motion® - and the weight saving potential is significant.

 

The S-in motion® Front Seats project identified where advanced high strength steels (AHSS) could be used to optimise and lightweight components while maintaining safety and performance. The scope of the study was a typical front seat for a C-segment passenger vehicle.

With commercially available seats weighing between 11.5 and 12.8 kilograms, the S-in motion® team first defined a baseline seat which weighed in at 12.4 kilograms. Their goal was to cut this to around 10 kilograms per seat using an optimised design and the latest AHSS.

 

Design optimisation to reduce weight

The Global R&D team looked at a range of steel solutions including high strength low alloy (HSLA) grades, and more advanced dual-phase and complex-phase steels. Fortiform® – ArcelorMittal’s range of steels for cold forming was also considered. As a third generation AHSS, Fortiform® provides the opportunity for additional weight reduction thanks to its higher mechanical properties and excellent formability. Fortiform® is particularly suitable for automotive parts with complex shapes which require crash resistance.

The use of AHSS was combined with part redesign to take maximum advantage of the advanced mechanical characteristics of the new steels. These parts included the backrest side-member, cushion side-member, gusset, and brackets. Some parts, such as the backrest side-member were redesigned by the S-in motion® team to reduce the number of parts. This reduced both weight and assembly time without affecting safety.

 

The S-in motion® Front Seats designs passed all crash validation tests

Significant weight reductions realised

Two S-in motion® Front Seat designs were developed as a part of the project. The first – known as the Ultimate design – reduced the weight of the seat from 12.4 to 10.1 kilograms, a saving of 2.3 kilograms (18.3 percent) per seat. With two front seats, the total saving could be 4.6 kilograms per vehicle.

The second solution – the Efficient design – reduced the weight of the seat to 10.4 kilograms, a saving of 2.0 kilograms (15.5 percent) per seat. However, this solution is achievable at a slightly lower cost to manufacturers. In high-volume production (over half a million seats per year), both S-in motion® seat designs can reduce costs.

The two options allow seat makers to achieve a compromise between weight savings and cost without affecting safety. Both options were validated against crash load cases (front and rear crashes and luggage retention) and static load cases (seatbelt anchoring, and backrest and cushion stiffness). Material failure analysis was also performed. In all cases, both S-in motion® seat concepts performed according to design standards for passenger vehicles.

 

Potential weight savings for each component of the Ultimate S-in motion® seat

Although the S-in motion® Front Seats study looked at front seats for a C-segment vehicle, the solutions are applicable to other vehicle segments. The S-in motion® seats would fit most C- and D-segment vehicles. The new S-in motion® seat designs will be rolled-out to customers in the last quarter of 2017.

 

Top four reasons to use AHSS steel in seats

  • Weight – significant reductions are possible
  • Cost – potential reduction through effective design
  • Safety – seat design standards were met using AHSS and specific design shapes
  • Sustainability – steel is 100% recyclable at the end of the seat’s useful life

 

Material breakdown

You may also be interested in

Explore our best-in class steel solutions

Search our products

By strength

550MPa 1000MPa
550MPa 1000MPa

By product reference




Results


Strength

700 500 MPa 2000 MPa

Tailor your ArcelorMittal Automotive web experience

I am ...

I am especially interested in information about automotive steel for…

My ArcelorMittal Automotive space

This is your personal space on ArcelorMittal's global automotive website. You can keep your favorite ArcelorMittal automotive web pages and documents in a safe place

My space

Configure this website

If you want, you can tailor your web experience on this automotive website to your personal needs. By selecting your job profile and/or region (both optional) you enable us to personalize the content you see on this website.
No matter which job profile or region you select, you will always have unlimited access to all the information on this website. The only thing that changes is that you will be offered more tailored content. As well as your profile and region, we also use your browsing history on this website to remember your personal preferences and identify the most appropriate content for you.
We are confident that this will help you to find the inspiration you are looking for on the ArcelorMittal automotive website.